Applications
Request QuoteVerilon® Vinyl Strip Doors Are Available in Four Ways
- Strip doors made to your requirements, including easy-to-install mounting hardware.
- Bulk Rolls of vinyl strip for those who prefer to make their own plastic strip doors. Use the recommendations below to help you determine the proper gauge, width, and overlap. Door Mounting Hardware can also be purchased separately.
- Bulk rolls of strip, perforated to the desired length and pre-punched for easy installation. Mounting holes are pre-punched on 2″ centers for mounting hardware.
- Individual Strips to replace worn or damaged strips.
| Application | Thickness | Width | Overlap |
|---|---|---|---|
| For lightweight traffic closures only, such as conveyor doors (not for exterior openings). | .006" | 6" | Full (3") |
| For freezers, coolers, refrigerated trucks and personnel doors. | .080" | 8" | 2" |
| For interior doors to 10' high. Not recommended for exterior opening. | .080" | 8" | Full (4") |
| For minimum protection for interior/exterior openings from 9' to 14' high. | .120" | 12" | 4" |
| For better protection for interior/exterior openings from 9' to 14' high, severe temperature and windy conditions. | .120" | 12" | Full (6") |
| For exterior doors up to 20' high with heavy vehicular traffic. | .160" | 16" | 4" |
| For exterior doors up to 25' high with constant heavy-duty equipment traffic. Best for sound control. Not recommended for frequent personnel traffic. | .160" | 16" | Full (8") |
Guide for Determining the Strip Quantity Required for your Enclosure
- 6″ wide strip with 2″ overlap; multiply sq. ft. of opening by 3.0
- 6″ wide strip with full (3″) overlap; multiply sq. ft. of opening by 4.0
- 8″ wide strip with 2″ overlap; multiply sq. ft. of opening by 2.0
- 8″ wide strip with full (4″) overlap; multiply sq. ft. of opening by 3.0
- 12″ wide strip with a 4″ overlap; multiply sq. ft. of opening by 1.5
- 12″ wide strip with a full (6″) overlap; multiply sq. ft. of opening by 2.0
- 16″ wide strip with a 4″ overlap; multiply sq. ft. of opening by 1.0
- 16″ wide strip with a full 8″ overlap; multiply sq. ft. of opening by 1.5
On wall mount installations, remember to allow an extra 3″ on top and 6″ on each side to the door’s measurement.
Information and specifications subject to change without notice.
